-
Your cart is currently empty.
4-Stage Reverse Osmosis System & TFC Membrane |
|
| • | Made for all water types (well or chlorinated city water) |
| • | Ships Complete with all filters and membrane factory pre-installed |
| • | For use with all SS series filters and membranes |
| • | ASSEMBLED IN THE USA! |
This reverse osmosis system utilizes four separate stages to treat your water down to ultimate purity. Using only the finest materials and craftsmanship, your SS Series Reverse Osmosis System will provide your family with great-tasting purified water at your sink, or even at your refrigerator's ice maker. The system is a great alternative to bottled water or to bulky coolers, using heavy to lift bottles, and it's economical too - costing less than a few pennies per gallon!
Uses |
|
| • | Connect your system to your ice maker for pure, crystal clear ice cubes |
| • | Effective for removing fluoride, chlorine, arsenic, VOC's, herbicides, and pesticides |
| • | Use for steam irons, fresh flowers, humidifiers |
| • | Make great-tasting coffee and tea |
Stage Descriptions |
|
| 1 | Pre-Filter: NSF 5 Micron Spun Polypropylene (sediment reduction) |
| 2 | Post-Filter: NSF 0.5 Micron Carbon Block (taste, odor, and chlorine reduction) |
| 3 | Filmtec TFC Membrane: NSF Thin Film Cellulose (removes impurities) |
| 4 | Polishing Filter: Inline Granular Activated Carbon (taste and odor reduction) |
Included Accessories |
|
| Complete RO System | NSF Steel Water Storage Tank |
| RO Membrane (Pre-installed) |
Pre, Post, and Polishing Filters (Pre-installed) |
| Tank Shut-Off Valve |
NSF John Guest Quick Connect Fittings |
| NSF Color-Coded Tubing |
NSF Chrome Long-Reach Faucet |
| 3/8" Tubing Adapter |
Self-Piercing Inlet Saddle Valve Assembly |
| Drain Saddle Clamp Assembly |
Filter Change Wrench |
| System Shut-Off Valve |
Complete Installation Guide |
System Specifications |
|
| Inlet Pressure: | 25 PSI - 70 PSI |
| Inlet TDS: | 0 PPM - 1000 PPM |
| Water Temperature: | 34°F - 85°F |
| Hardness: | < 10 GPG |
| Iron: | < 1 PPM |
| Filter Change: | 9 - 12 Months |
| Membrane Change: | 2 - 5 Years as Needed |
| Shipping Weight: | Approx. 25 lbs. |
Water conditions outside of the above specified limits may lead to a shortened filter and membrane life. Also, the membrane element is treated with a chemical preservative. After installation, the system should be flushed with sufficient water before use. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the unit. The system must be protected from freezing. Failure to do so may result in cracking of the filter housing and/or water leakage.
Standard Replacement Filters: 3-Filter Pack (Standard)
High Flow Replacement Filters: 3-Filter Pack (High Flow)
If the items in your order qualify for 'Free Shipping' and total $75.00 or more, your order ships FREE* and is applied to your cart at checkout! Order under this amount will be charged flat rate shipping of $14.95.
Learn more about our shipping policy to Alaska, Hawaii, and International shipping here.
*Free shipping to the Contiguous United States. (Lower 48 states only. Does not include Alaska or Hawaii.)
Since 1999, QualityWaterForLess.com has been shipping the best in water treatment equipment. We sell only the finest, professional-grade products to our customers, and all well below retail pricing.
